High Power Metal Clad Braking Resistors, metal terminal connection, 600W-5000W

Construction:

1. Insulation is applied through a high-temperature process.
2. An aluminum encased consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure.
3. After high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and hardening.
4. Since this component is embedded in the heat-proof cement, it is not affected by external mechanical force, and dusty environments.

Features:

1. Aluminum house, good heat dissipation.
2. High Insulation alibility
3. Widely used in inverter, elevator and UPS system.

Dimensions:

Type	Rated power (w)	Resistance range (Ω)	Tolerance	Dimension (mm)				High Temperature Cable	Remark
				L1±1.5	L2±1	W±1	H±1
AS-T	60	0.1～10K	±1%(F) ±2%(G) ±5%(J)	115	98	40	20	1.5~2.5mm² 150~300mm
AS-T	80	0.1～10K		140	123
AS-T	100	0.1～10K		165	148
AS-T	120	0.1～10K		190	173
AS-T	150	0.1～10K		215	198
AS-T	200	0.1～10K		165	147	60	30
AS-T	300	1～10K		215	197
AS-T	400	1～10K		265	247
AS-T	500	1～10K		335	317
AS-T	800	1～10K		400	382	60	60
AS-T	1000	1～10K		400	384	50	107
AS-T	1200	1～10K		450	434
AS-T	1500	1～10K		485	469
AS-T	2000	1～10K		550	534

Electrical Performance:

Inspection item	Function requirement	Test method
Insulation resistance	>1GMΩ	500VDC,1min
Withstand voltage	No breakdown and arc flying	3000VAC,5s
Over load	No visible damage, △R≤±(1％R+0.05Ω)	10 Times,5s
Terminal tensile strength	No visible damage, △R≤±(1％R+0.05Ω)	20N,10s
Temperature Change	No visible damage, △R≤±(2％R+0.05Ω)	-55℃~+200℃, 3 cycles
Vibration	No visible damage, △R≤±(2％R+0.05Ω)	10Hz~500Hz,50m/s²,30min
Damp heat steady state	No visible damage, △R≤±(5％R+0.1Ω)	40±2℃,RH(90~95)%,96h
Endurance	No visible damage, △R≤±(10％R+0.1Ω)	25℃,Ur,1000h

PDF Specification download